White Luster Jewelry Polishing Compound Buffing Rouge Jewelers Polish Metals

Description

WHITE  LUSTER
WHITE POLISHING COMPOUND
BUFFING ROUGE BAR - JEWELERS WHITE POLISH
METAL BUFFING MATERIAL  -  LARGE 1.2 POUND BAR
Buffing Compound provides a High Luster finish on all types of precious and decorative metals. Its formulation removes light scratches and produces a fast and bright final luster. Bars are rectangular; compound is poured in 1.2 Lb. mold size bars, weights will vary on each bar.
Made in USA
A particular quality of the White Luster is that the final finish has no discoloration. It is a grease-less and dry compound will adhere to the buffing wheel with the heat created by the friction of the rotating buff, leaving very little residue for fast and easy clean up. The White Luster is a very popular compound with Jewelry Manufacturers in the US.
Compound works very well with all metals.
It is excellent for metals that scratch easily, can be used on a wide range of metals is excellent for Silver, Brass,
Aluminum
, and very good finish on Automotive accessories..
.
NOTE:
We have included polishing recommendations at the bottom of this page, to assist you.
WHITE  LUSTER
COMPOUND
JETS Product #1614-052
Made in USA
Bars Size:
6" x 2" x 1-3/4"
-
150mm x 53mm x 45mm
-
Bar Weight:
1Lbs Bar
- 2
oz.  +/-
-
·
Utilizes Quality Grade Abrasives
·
Combined with Additives
·
Long Lasting Composition with Minimum Usage
·
Good Adhesion to Buffing Wheels
·
Minimal Residue
·
No Discoloration
·
Produces -  High Shine
.
SALE
IS FOR 1 BAR
SHIPPING: Via USPS MAIL
NOTE: Visit
JETS INC.
our
ebay
Store where you can see listing of the full variety of Polishing Compounds, Buffs and Buffing Wheels and a selection of
J
ewelers
E
quipment
T
ools &
S
upplies
.
JETSINC.
POLISHING RECOMMENDATIONS:
Our recommendations and suggestions on Buffing to obtain the best results possible:
·
Use the right compound for the metal that you are trying to polish
·
It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.
·
Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.
·
Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.
·
Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.
If you have to then make sure buffs are cleaned (dressed) with a buff rake.
·
A clean buffing wheel edge is important.
·
Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process.
·
Whenever you are working with Platinum never use a buff that was used for another type of metal.
WORK SAFE!
Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed
.
PROTECTION -
Protect yourself, your fingers and hands, your face and eyes and use respirators
.
15B
7X-RB-A 6.3LZ   10X-RB-A 8.6Lz   Z M P