Set of 3 Jewelers Rouge Polish Gold Silver Jewelry Compound - Green White Red

Description

SET OF 3 JEWELERS POLISHING COMPOUND
MOST POPULAR COMPOUNDS - GREEN /
WHITE / RED
SALE is for 3 BARS - 1 EACH COLOR - Bars are 1oz @
The polishing compounds are a high grade premium polishing compounds specifically formulated for Precious Metals in Jewelry Polishing.  Although compounds are popular in Jewelry applications these compounds are used for polishing many other metals. Compounds are specially formulated for good adhesion to the buff wheel, fibers of brushes, and felts. So, only minimal quantities are needed to be used.
·
GREEN
-
# 1614-
12201
Green rouge polishing compound is formulated for White Metals and Hard Metal Alloys.  Green rouge works with White and Yellow Gold, Silver, Stainless and Chrome Alloys and can be used for Platinum.
·
WHITE
-
# 1614-10501
White Luster polishing compound is formulated especially for Silversmiths and Goldsmiths to polish and finish with a high luster.
.
·
RED
-
# 1614-10301
RED polishing compound is the most popular and commonly used in polishing, especially for Gold.  It is the most popular polishing compound for Yellow Gold, Copper and Brass brings out the high shine glow for Jewelry.
Note: The weight of the bars will vary from form 1oz - 1.3oz - due to the process of extrusion by the manufacturer.
Compound is used with a buffer, motor or rotary tool and is applied directly to the surface edge of the buff wheel.  The rotation of the buff will create friction and the heat generated will dress the buff with the compound and will be ready to polish the parts.
NOTE:
We have included additional polishing information and recommendations at the bottom of this page, to assist you.
NOTE: Visit
JETS INC
ebay Store Listings, where you can see the compounds for various Metals and Applications, Polishing Compounds, Felt and Muslin Buffs and Buffing Wheels and a selection of  J
ewelers
E
quipment
T
ools
&
S
upplies
.
JETS Inc.
321 E4 CKSP
POLISHING RECOMMENDATIONS:
Our recommendations and suggestions on Buffing to obtain the best results possible:
·
Use the right compound for the metal that you are trying to polish
·
It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.
·
Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.
·
Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.
·
Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.  If you have to then make sure buffs are cleaned (dressed) with a buff rake.
·
A clean buffing wheel edge is important.
·
Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process.
·
Whenever you are working with Platinum never use a buff that was used for another type of metal.
WORK SAFE!
Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed
.
PROTECTION -
Protect yourself, your fingers and hands, your face and eyes and use respirators
.