Rappit Plaster Molding Cloth Medical Grade Bandage Sandtastik 4" X 15' 9 sq. ft.

Description

Rappit Plaster Molding Cloth Medical Grade Bandage Sandtastik Mask kit 9 sq. ft.. 4" by 15 feet roll. Condition is New, old stock. Item packaging may appear different than picture.
Make creative products, home, scool, crafts, home school.
Home Plaster Casting Plaster Mask (Face Casting)
OVERVIEW:
Let's create a mask from a person's face. You can ask a friend, family member or subject to sit very still in a chair or lay down on the floor while you perform the following tasks. I highly recommend preparing all materials before beginning to apply Sandtastik's Rappit Plaster Molding Cloth to your subject.
SUPPLIES:
Rappit Plaster Molding Cloth 4" x 15' Roll
Soft Tissue or Gauze
Petroleum Jelly
Decorative Paints Crayons Colored Pencils
Scissors
Water Bowl
Sandpaper
Brushes
DIRECTIONS
STEP 1 CutRappit Plaster Molding Clothinto thin strips and set aside. 5 cm (2") wide x 30 cm (12") long.
STEP 2 Pour cool water into a wide bowl to a depth of about 1". NOW YOU'RE READY FOR YOUR FACE
STEP 3 Cover subject's eyes with soft tissue or gauze. Prepare desired surface of face with a thin layer of petroleum jelly. This will help to remove finished casting with ease and make clean up a snap.
STEP 4 With wet hands, dip a strip of Rappit Plaster Molding Cloth into cool water and place onto subject's face. HINT: Start with area over the eyes to ensure that tissue or gauze stays in place properly
STEP 5 Repeat this process, slightly overlapping previously laid strips, until you obtain desired size and shape. WARNING: DO NOT COVER NOSTRILS
STEP 6 Let dry for a few minutes before attempting to remove from surface. Once removed, shape/finish nose area. HINT: You can encourage texturizing/smoothly of plaster surface by gently gliding over surface with wet finger tips. HINT: You can strengthen mask by adding more Rappit Plaster Molding Cloth strips to the inside of mask so as not to distort facial features.
STEP 7 (Optional) Can be air cured or placed in microwave to dry. (30 sec. intervals)
STEP 8 (Optional) Once mask is thoroughly dry, use a fine grit sandpaper and gently sand surface to desired finish.
STEP 9 (Optional) Paint and decorate!
STEP 10 (Optional) Feel free to add accessories for a personal touch. SANDTASTIK PRODUCTS LTD.