Magikmold® T-124 Five Gallon Kit Tincure Silicone Pail Kit 44lb

Description

Duplicate the most intricate parts.
Magikmold
®
T-124 Silicone Rubber will reproduce the finest detail and is one of our top sellers!
Magikmold
®
T-124 is a high strength, pourable, two-component room-temperature curing (RTV) silicone rubber. Low in viscosity and easy to pour, we recommend this for duplication of models high in detail and with many undercuts.
Use the standard purple catalyst for about 60-90 minutes working time and a 12-18 hour demold time. For a faster cure, use the Medium-Fast Yellow Catalyst or Red Fast Catalyst for the fastest cure. Magikmold
®
T-124 is a pourable material; however, you can make it brushable with the thixotropic additive.
Purple is shipped if another catalyst is not requested.
Available with three different catalysts:
·
COMES WITH STANDARD PURPLE CATALYST
(Magikmold® T-124 Catalyst) | 60-90 MINUTE WORK LIFE | 12-18 HOUR DEMOLD
·
ORDER MEDIUM-FAST YELLOW CATALYST
(Magikmold® T-100 Medium Yellow Catalyst) TO SPEED IT UP TO 30-35 MINUTE WORK LIFE | 6-8 HOUR DEMOLD
·
ORDER FAST RED CATALYST
(Magikmold® T-100 Fast Red Catalyst) TO SPEED IT UP TO 15-30 MINUTE WORK LIFE | 4-5 HOUR DEMOLD
Specifications per Catalyst
Magikmold® T-124 Catalyst (Standard)
Magikmold® T-100 Medium Yellow Catalyst
Magikmold® T-100 Fast Red Catalyst
Pot Life
60 – 90 min.
30 – 35 min.
15 – 30 min.
Demold Time (@ 77°F)
12 – 18 hr.
6 – 8 hr.
4 – 5 hr.
Cured Color
Purple
Yellow
Pink
Magikmold
®
T-124 Features
·
Easy to use and will cure against sulphur clay
·
Very good flowability and self de-airation
·
Fast cure
·
Excellent tear strength – High resistance to laceration
·
Characteristic guarantees high resistance to wear and tear
·
High elongation and stretchability (500% elongation)
·
High level of accuracy in reproducing very small particulars
·
Outstanding chemical resistance to attack by polyurethane resins. Mold life is significantly extended.
·
You may need our
thickener fluid.
Makes silicone paintable, so it doesn’t drip or run!
Physical Properties
Type
Tin-cured (condensation-cure)
Mix Ratio by Weight
1 Part Catalyst : 10 Parts Base
Shore Hardness
A23 – A26
Mixed Viscosity
24,000 cP
Specific Volume
25.4 in³/lb
Specific Gravity
1.09
Tensile Strength
370 psi
Elongation
514 %
Die B Tear Strength
74 pli
Die T Tear Strength
16.0 pli
All of the following are commonly cast into this silicone:
·
Urethane (polyurethane)
·
Plaster
·
Soap
·
Wax
·
Polyester casting resin
·
Hydrocal, Hydrostone
·
Epoxy
48 contiguous states only.
Alaska, Hawaii, Puerto Rico and other international orders please contact us for a shipping quote.