Jewelers Red Rouge & White Luster Polishing Buffing Compounds 2 Bars -1 Pound ea

Description

Jewelers Rouge Polishing Compounds 2 BARS
Red Rouge Bar & White Luster Bar
SALE
IS FOR 2 BARS
One Each of RED & WHITE
-
RED ROUGE for Yellow Gold
Product # 1614-103-R
Made in USA
Polishing compound Red rouge in a 1 pound bar - a premium grade
compound formulated to give high luster finish for Jewelry Polishing - especially to Yellow Gold. This is the most popular compound used by Jewelry manufacturers.
Cleaning and removing residue compounds can be easily cleaned in an ultrasonic cleaner.
Compound can also be used on Brass and Copper with excellent results, will also work with other soft nonferrous metals.
JETS Product # 1614-103 R
Made in USA
Weight 1 lb Bar
(Usually MORE + 1oz.)
-
WHITE LUSTER for White Gold
JETS Product #1614-052
Made in USA
White Luster Buffing Compound provides a High Luster finish on all types of precious and decorative metals. Its formulation removes light scratches and produces a fast and bright final luster. Bars are rectangular; compound is poured in 1 Lb. mold size bars, weights will vary on each bar.
A particular quality of the White Luster is that the final finish has no discoloration. It is a grease-less and dry compound leaving very little residue for fast and easy clean up.
Compound works very well with soft metals.
It is excellent for metals that scratch easily, can be used on a wide range of metals are excellent for Silver, Brass, and Aluminum.
NOTE: Visit
JETSTOOLS
our ebay Store where you can see listing of the full variety of Polishing Compounds, Buffs and Buffing Wheels and a selection of
J
ewelers
E
quipment
T
ools &
S
upplies
.
JETSINC.
15B
FRE 817
CKSP
M
POLISHING RECOMMENDATIONS:
Our recommendations and suggestions on Buffing to obtain the best results possible:
·
Use the right compound for the metal that you are trying to polish
·
It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.
·
Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.
·
Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.
·
Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.
If you have to then make sure buffs are cleaned (dressed) with a buff rake.
·
A clean buffing wheel edge is important.
·
Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process.
·
Whenever you are working with Platinum never use a buff that was used for another type of metal.
WORK SAFE!
Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed.
PROTECTION -
Protect yourself, your fingers and hands, your face and eyes and use respirators.