Fluke 773 Milliamp Process Clamp Meter, 4 to 20 mA

Description

Untitled Document
Fluke 773 Milliamp Process Clamp Meter, 4 to 20 mA
Model:
773
| Order No:
773
Ideal for troubleshooting transmitters, valves, and programmable logic controllers (PLCs) found in process plants. This meter measures 4 to 20 mA signals without breaking the loop, which allows it to troubleshoot a live device without having to power down. Additionally, users can detach the clamp section of the meter.
Brand:
Fluke
Model:
773
Order No:
773
Condition:
NEW
Description
Fluke 773 Milliamp Process Clamp Meter, 4 to 20 mA
A process clamp meter saves time and money by measuring output signals without shutting down the system
Capable of measuring 4 to 20 mA signals five times faster than a traditional multimeter without breaking the loop. That means this process clamp meter allows the user to troubleshoot a live device without needing to power down and possibly miss something going on in the process.
Ideal for troubleshooting transmitters, valves, and programmable logic controllers (PLCs) found in process plants, this instrument also measures low-level DC and correlates process indication with real physical value. And it measures up to 99.0 mA non-contact, including 10 to 50 mA signals in older control systems.
Additionally, this tool sources and measures dc voltage, therefore it can be used to troubleshoot voltage input and output devices. The user can detach the clamp section of the meter and use it as a remote jaw, connected to the main body by an extension cable to make it easier to take measurements in tight spaces. Plus, automatic power-off features save battery life so you can work longer without charging the batteries.
Features
Loop calibrator that measures 4 to 20 mA signals without breaking the loop
Source 4 to 20 mA signals for testing control system I/O or I/Ps
Simulate 4 to 20 mA signals for testing control system I/O
Measure 4 to 20 mA signals with in-circuit measurement
Simultaneously measure mA in-circuit with 24 V loop power for powering and testing transmitters
Source mA output signals in a linear ramp or 25 % step output - automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
DC voltage measurement to verify 24 V power supplies or voltage I/O signals
Source dc voltage to test input devices that accept a 1 to 5 volt or 0 to 10 volt signal
Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp - Output mA signal enables a logging DMM or other device to record the 4 to 20 mA signal without breaking the loop
mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal - apply a mA input signal to a device and measure its' 4 to 20 mA output on devices such as valves or mA isolators
Voltage output linear ramp or 25 % step output - automatically change the voltage output for remote testing
Delivers 0.01 mA resolution and sensitivity
Measurement spotlight to illuminate hard to see wires in dark enclosure
Measures 10 to 50 mA signals in older control systems using the 99.9 mA range
Applications
Troubleshooting transmitters
Troubleshooting valves
Troubleshooting programmable logic controllers (PLCs) found in process plants
Html->link('Fluke Clamp Selection Guide', DS . $filePathSetting, array('class' => 'btn btn-info', 'target' => "_blank", 'style' => '', 'escape' => false)); ?>
Included
Milliamp Process Clamp Meter
Test Leads
Alligator Clips
Hanging Strap
Carrying Case
User Manual
Specifications
Measurement mA (Measured by Clamp)
Resolution/Range
0 to 20.99 mA
Accuracy
0.2% + 5 counts
Resolution/Range
21.0 to 100.0 mA
Accuracy
1% + 5 counts
Measurement mA (Measured in Series with Test Jacks)
Resolution/Range
0 to 24.00 mA
Accuracy
0.2% + 2 counts
Source mA (Maximum mA Drive: 24 mA into 1000 &ohm)
Resolution/Range
0 to 24.00 mA
Accuracy
0.2% + 2 counts
Simulate mA (Maximum Voltage 50 V DC)
Resolution/Range
0 to 24.00 mA
Accuracy
0.2% + 2 counts
Voltage Source (2 mA Maximum Drive Current)
Resolution/Range
0 to 10.00 V DC
Accuracy
0.2% + 2 counts
Voltage Measure
Resolution/Range
0 to 30.00 V DC
Accuracy
0.2% + 2 counts
General Specifications
Diameter of Measurable Conductor
0.177" (4.5 mm) max
Operating Temperature
14 to 122°F (-10 to 50°C)
Storage Temperature
-13 to 140°F (-25 to 60°C)
Operating Humidity
<90% at <86°F (30°C)
<75% at 86 to 131°F (30 to 55°C)
Operating Altitude
0 to 6561.7' (0 to 2000 m)
Dimensions
2
7
⁄
8
x 5¾ x 11
5
⁄
8
" (44 x 70 x 246 mm)
Weight
0.9 lb (410 g)
IP Rating
IP 40
Terms & Conditions
Item Condition:
Unless specified otherwise all products listed are Brand New in the original factory packaging and include a full factory warranty.
Shipping:
We currently only ship to U.S. buyers. We ship items within one or two business days from payment. We do not process shipments on weekends and holidays. Local pick up is not available. We only ship to addresses verifiable by either PayPal or credit card issuing bank.
Please note that we cannot alter the address once a purchase is made. In the case of PayPal payment, we will ship orders when the payment is marked “Eligible” for PayPal Seller’s protection.
*Shipping Rates are for Continental US, Please Contact us for other US Destinations
Payment:
Currently all payments must be made directly though PayPal
Sales Tax:
We are required to charge sales tax in North Carolina
Return Policy:
If for any reason you are not 100% satisfied with a product you receive from us, you may return the regular stock product within 30 days from the time of receipt, for a full refund or exchange of the product you purchased (less any shipping costs). Within this time, products may be returned; freight prepaid and must be in their original packaging and in resalable condition.
Shipping errors, missing items or damages must be reported to us immediately (damages should be accompanied by a signed bill of lading acknowledging the damage). Items returned will be inspected for damage or misuse at which time they may be subject to restocking fees, other fees or refused, prior to the issuance of any credit.