Dialux Polishing Compound 8 Bars Set Every Type of Jewelers Rouge Polish Tripoli

Description

D
I
A
L
U
X
JEWELRY POLISHING COMPOUNDS
8 BAR ASSORTMENT
OF ROUGE POLISH TRIPOLI
1 BAR OF EACH TYPE
OF
DIALUX
®
PREMIUM BRAND
RED
/
BLUE
/
WHITE
/
GREEN
/
YELLOW
/
GRAY
/
ORANGE
/
BLACK
DIALUX
®
Brand polishing compounds originally formulated in France has been a popular polishing compound for over 50 years.
The Dialux
®
polishing compounds are a high grade premium line of compounds specifically formulated for Precious Metals in Jewelry Polishing used by Goldsmiths and Silversmiths.
"A-1 TOP QUALITY"
the Very Best polsihing compounds.
These are "Original" compounds not similar ones from CHINA
.
The assortment has 1 Bar of every type of compound formulation that is produced under the Dialux
®
Brand.
Bars are individually wrapped like Chocolates.
D
i
a
l
u
x
®
CUTTING - POLISHING & FINISHING COMPOUNDS
JETS Product # 1614-990
Made by Lippert/Unipol
Bar size:
4" x 1" x 1-1/8"
- 100mm x 25mm x 30mm
Bar Weight:
120 Grams - 4 Oz.
.
·
RED
"
ROUGE DE PARIS
"
-
Used for Super Finishing yellow color metals, especially Gold.
·
YELLOW
"JAUNE" -
Bright Shine, buffing compound for Brass,
Copper, Bronze, Soft Metals
(
Note:  The Yellow Dialux Bar color is actually a BROWN tone, the name & label is Yellow)
·
BLUE "BLEU DE PARIS" -
Used for High Shine finish on all
Metals, works very well on Platinum
·
WHITE
"BLANC"
-
Bright Polish on White Metals - Silver
·
ORANGE "VORNEX"
-
Remove Scratches, prep surface, Cutting
Compound Tripoli
·
BLACK "NOIR"
-
Super Premium
Polish on Silver and White
Metals
·
GREEN "VERT"
-
Used for Polishing Silver & White Color metals
·
GRAY
"GRIS"
-
Cut & Semi-Polish for Stainless and Hard White
Color metals.
NOTE:
We have included polishing recommendations at the bottom of this page, to assist you.
NOTE: Visit
JETSTOOLS
our
ebay Store Listings, where you can see
INDIVIDUAL
D
i
a
l
u
x
®
Polishing Compounds and Polishing Buffs and Felt Buffing
Wheels along with a selection of
J
ewelers
E
quipment
T
ools
&
S
upplies
.
JETSINC.
POLISHING RECOMMENDATIONS:
Our recommendations and suggestions on Buffing to obtain the best results possible:
·
Use the right compound for the metal that you are trying to polish
·
It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.
·
Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.
·
Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.
·
Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.
If you have to then make sure buffs are cleaned (dressed) with a buff rake.
·
A clean buffing wheel edge is important.
·
Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process.
·
Whenever you are working with Platinum never use a buff that was used for another type of metal.
WORK SAFE!
Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed.  Protect yourself, your fingers and hands, your face and eyes and use respirators. An Apron or Smock is not a bad idea.
FRe 2.8Lz
212 CKP  Z  M P