Dialux Jewelry Polishing Compound 6 BARS Jewelers Rouge Polish Jewelry & Metals

Description

JEWELRY POLISHING COMPOUNDS
D
i
a
l
u
x
®
POLISHING COMPOUNDS
ASSORTMENT
SET 6 Pcs
POLSHING COMPOUNDS  -  DIALUX
®
FRENCH
1 BAR EACH  -  A
SET OF
6
BARS
RED
/
BLUE
/
WHITE
/
GREEN
/
YELLOW
/
GRAY
DIALUX
®
Brand polishing compounds originally formulated in France has been a popular polishing compound for over 50 years.
The Dialux polishing compounds are a high grade premium polishing line of compounds specifically formulated for Precious Metals in Jewelry Polishing.
These are "Original" compounds not similar ones from CHINA
.
DIALUX SET
:
CUTTING - POLISHING & FINISHING COMPOUNDS
Bar size:
4" x 1" x 1-1/8"
-
100mm x 25mm x 30mm
Bar Weight:
120 Grams
-
4 Oz.
·
RED
"ROUGE DE PARIS"
-
Used for Super Finishing yellow color metals, especially Gold.
·
YELLOW
"JAUNE"
-
Used for Bright Shine on Brass - Copper - Bronze - Soft Metals - Non ferrous Metals
(
Note:  The Yellow Dialux Bar color is actually a BROWN tone, the name & label is Yellow)
·
BLUE "BLEU DE PARIS"
-
Used for High Shine on all metals
·
WHITE "BLANC"
-
Used for Bright Polish on White Metals - Silver
·
GREEN "VERT"
-
Used for Polishing Silver & White Color metals
·
GRAY
"GRIS"
-  Used for Cutting & Semi-Polish for Stainless & Hard White Color metals.
NOTE:
We have included polishing recommendations at the bottom of this page, to assist you.
JETS Product # 1614-90234567
Made by Lippert/Unipol
SHIPPING: ViaUSPS MAIL      Domestic via PRIORITY MAIL FLAT RATE Mail®
NOTE: Visit
JETSTOOLS
our
ebay Store Listings, where you can see INDIVIDUAL
D
i
a
l
u
x
®
Polishing Compounds along with Polishing and Buffing Wheels in various sizes and materials and a selection of
J
ewelers
E
quipment
T
ools
&
S
upplies
.
JETSINC.
POLISHING RECOMMENDATIONS
:
Our recommendations and suggestions on Buffing to obtain the best results possible:
·
Use the right compound for the metal that you are trying to polish
·
It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.
·
Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.
·
Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.
·
Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.
If you have to then make sure buffs are cleaned (dressed) with a buff rake.
·
A clean buffing wheel edge is important.
·
Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process
·
Whenever you are working with Platinum never use a buff that was used for another type of metal.
WORK SAFE!
Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed
.
PROTECTION -
Protect yourself, your fingers and hands, your face and eyes and use respirators
.
28B int 312 CKSP Z M P