-40%

AIMS Power 1500W 1500W Pure Sine Inverter Charger, ETL Certified Conforms to UL4

$ 452.49

Availability: 100 in stock
  • Refund will be given as: Money Back
  • MPN: PICOGLF15W12V120V
  • Max. Output Power: 1500 W
  • Item must be returned within: 30 Days
  • Brand: AIMS
  • Condition: New
  • Model: AIMS UL4
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted

    Description

    Product Specification:
    POWERFUL: 1500W continuous, 4000W surge for 20 seconds, 12.5 amps pure sine clean power, low frequency, auto transfer switch and 50A smart battery charger for 8 different battery technologies including lithium.
    PROTECTIONS: Overload, over temp, high voltage, low voltage, short circuit, internally fused, low and high voltage alarm, cooling fan, and isolated ground neutral.
    FEATURES: GFCI outlet, AC direct connect terminal block, charge current control dial, dip switches to set priorities, auto gen start, conformal coated, power save mode. Only one set of cables needed. Optional remote available. Listed to UL & CSA.
    APPLICATIONS: Ideal for applications going back and forth from shore/generator and inverter power automatically. Homes, boats, RVs, solar, mobile business & work trucks. Offgrid & back-up power.
    TRUST AIMS: Buy with confidence. In business for over 20 year. All tech and warranty support in Nevada. 2 Yr warranty.
    Product description
    AIMS Power PICOGLF15W12V120V Pure Sine Inverter Charger, ETL Certified, Conforms to UL458 Standards, 1500 watt low frequency inverter, 4500 watt surge for 20 seconds -3x surge capability, Battery Priority Selector, Terminal Block, GFCI
    Key Features
    ETL Certified, Conforms to UL458 Standards
    1500 watt low frequency inverter
    4500 watt surge for 20 seconds -3x surge capability
    Battery Priority Selector
    Terminal Block
    GFCI
    Marine Coated and Protected
    Multi Stage Smart charger 50 Amp
    Remote panel available
    Auto gen start
    Auto frequency
    10msec typical transfer time
    7 battery type settings for charger
    Selectable 25W power save mode (hibernation)
    Specifications
    Output Waveform: Pure Sine/Same as input (Bypass Mode)
    Output Voltage: 100-110-120Vac
    Nominal Efficiency: >92% (Peak)
    Line Mode Efficiency: >95%
    Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
    Typical Transfer Time: 10ms
    THD: <10% DC
    Nominal Input Voltage: 12.0Vdc
    Minimum Start Voltage: 10.0Vdc
    Low Battery Alarm: 10.5Vdc-11.0Vdc
    Low battery Trip: 10.0Vdc-10.5Vdc
    High Voltage Alarm: 16.0Vdc
    Low battery Voltage Restart: 13.0Vdc
    Idle Consumption: 13.5W
    Power Saver Mode Idle Consumption: 8W
    Dimensions: 15.35" x 11" x 7"
    Weight: 38 lbs
    From the manufacturer
    AIMS Power 1500 Watt 12VDC Pure Sine Inverter Charger, ETL Certified to UL458
    Features
    1500 Watt continuous power
    4500 Watt surge for 20 seconds 300% surge capability
    Dip switches to set priority
    GFCI Outlet
    Remote panel available
    ETL listed to UL 458 standards Issued 03/09/2016
    AIMS Power 1500 Watt 12VDC Pure Sine Inverter Charger, ETL Certified to UL458
    Pure Sine Power for On and Off Grid use
    This 600 watt pure sine inverter charger, ETL Listed to conform with UL 458 standards, is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak DC and AC conversion efficiency of 80%. It is packed with unique features. It features power factor corrected, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.
    Pure Sine Power for all of your devices
    Pure Sine Inverters have a cleaner signal compared to Modified Sine that have a 'blocky' signal. Pure sine wave is like the power you get from your local power company and from some pure sine generators (most generators are not pure sine).
    A major advantage of a pure sine wave inverter is that all of the equipment which is sold on the market is designed for a pure sine wave. This guarantees that the equipment will work to its full specifications.
    Some appliances, such as LED lights and microwave ovens will only produce full output with pure sine wave power.
    Audio equipment, satellite systems, and video equipment, will run properly using pure sine wave inverters.
    Pure Sine Wave Inverters outperform all other types of inverters, regardless of use.
    Key Features
    Optional Features
    Remote on/off switch
    with LCD for AIMS pure sine inverter chargers - The remote monitors battery voltage, AC input voltage, AC output voltage, frequency and load percentage. The remote can be flush mounted into a dash, job box or anywhere for quick access to key information. (Part # Remotelf)
    Battery temperature sensor
    - This allows careful monitoring of the batteries for extended life and longevity. The sensor plugs into the inverter and the other end is attached to the battery(s) and provides battery temperature information (Part # PICGLFBATS)
    Auto generator start
    - The inverter can be customized to start-up a generator when the battery voltage goes low.
    When the inverter goes to low battery alarm, it can send a signal to start a generator. The auto gen start feature will only work with generators designed to work with this feature.
    Battery Charger
    The AIMS Power 1500 Watt 12 VDC Pure Sine Inverter Charger, ETL Certified to UL 458 is equipped with a powerful 4-step smart charger capable of charging at 50 Amps.
    The built in battery selector for this inverter works with Gel USA, AGM 1, AGM 2, Sealed Lead Acid, Gel EURO, and Open Lead Acid battery types.
    The max charge current can be adjusted from 0%-100% via a liner switch to the right of the battery type selector. This will be helpful if you are using our powerful charger on a small capacity battery bank. Choosing '0' in the battery type selector will disable the charging function.AIMS Power 1500 Watt 12VDC Pure Sine Inverter Charger, ETL Certified to UL458
    Automatic Transfer Switch
    This inverter comes installed with an automatic transfer switch which will quickly transfer you to back up power in case of a power outage without you having to flip a switch. (10 ms max transfer time)
    When utility AC power cuts off (or falls out of acceptable range), the transfer relay is de-energized and the load is automatically transferred to Inverter mode. Once the qualified AC power is restored the relay is re-energized and the load is automatically reconnected to AC bypass mode.
    Easy Set Up and Technical Support
    Easy to set up and use. This inverter comes with an easy to follow manual. Additionally, all customers who buy from an authorized AIMS dealer can contact the AIMS technical support team directly for any questions during set up.
    AIMS Power will only warranty and provide technical support for products purchased through an authorized AIMS Power Dealer. Not every Amazon seller is an authorized AIMS Dealer. Make good purchasing decisions.
    Read more
    Technical Details
    Dimensions
    Unit weight: 38 lbs.
    Unit size: L x W x H: 15.35 x 11 x 7 inches
    Shipping weight: 46 lbs.
    Shipping size: L x W x H: 20.5 X 13.8 X 12.2 inches
    Color
    Blue
    Technical Specification
    Output Specifications
    Listed to UL 458 Standards
    Continuous output power: 1500 Watt
    Surge rating: 4500 Watt (20 seconds)
    Output waveform: pure sine/same as input (bypass mode)
    Output voltage: 100-110-120 VAC
    Nominal efficiency: >92% (peak) / Line mode efficiency: >95%
    Output frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
    Bypass terminal breaker – 20 amps / GFCI breaker – 15 amps
    Typical transfer time: 10ms
    THD: < 10% DC
    Input Specifications
    Nominal input voltage: 12.0 VDC
    Minimum start voltage: 10.0 VDC
    Low battery alarm: 10.5 VDC-11.0 VDC / Low battery trip: 10.0 VDC-10.5 VDC
    High voltage alarm: 16.0 VDC
    Low battery voltage restart: 13.0 VDC
    Idle consumption: 13.5 watts
    Charger breaker – 20 amps
    Power saver mode idle consumption: 8 watts
    Charger Specifications:
    Output voltage: depends on battery type
    Charger rate: 50A
    Read less
    AIMS 1500 Watt Pure Sine Inverter Charger 12 VDC to 120 VAC ETL Listed
    AIMS 1500 Watt Pure Sine Inverter Charger 12 VDC to 120 VAC
    AIMS 1500 Watt Modified Sine Inverter Charger 12 VDC to 120 VAC
    Model
    PICOGLF15W12V120V
    PICOGLF15W12V120VR
    PWRIC1500W
    Continuous Watts
    1500
    1500
    1500
    Surge Watts
    4500 (20 Seconds Max)
    4500 (20 Seconds Max)
    3000 (fraction of a second)
    Pure Sine


    -
    ETL Listed

    -
    -
    DC Volts (Input)
    12
    12
    12
    AC Volts (Output)
    120
    120
    120
    Weight / Dimensions
    38 lbs / 15.35 x 11 x 7 inches
    37.5 lbs / 14.1 x 8.74 x 7.10 inches
    6.8 lbs / 15.5 x 7.75 x 3.25 inches
    Battery Charger



    Common Application
    Off Grid and Back Up Home Power, RV
    Off Grid and Back Up Home Power, RV
    Mobile tools, Truck Drivers, Small pumps