(20x) Stick-On Hot Wheels / Matchbox Wall Display & Storage (up to 80 1:64 cars)

Description

(20x) Stick-On Hot Wheels / Matchbox Wall Display & Storage (up to 80 1:64 cars).
(20 PACK) Stick-on Hot Wheels/Matchbox Wall Display For Unopened (Carded) Cars - Each Holds up to 4 Cards - Fully Stackable for Large Walls
Designed & 3D Printed to give most efficient method of displaying your Hot Wheels efficiently while being aesthetically pleasing.
Solution to open Hot Wheels Display!
(DISPLAYS 80 CARS - 20 PIECES TOTAL - 4 ON EACH)
READY TO SHIP - PRE-MADE AND PACKAGED
Great for Hot Wheels / 1:64 scale car collections & storage
Adhesive
strip avoids the use of nails or screws (avoiding holes in walls, or making it possible to apply onto harder surfaces)
Each set of 20 takes 6 hour to print on average
Each unit has 4 hooks, all spaced to fit stacked cars on top
Can fit a maximum of 4 cars (hides the art on card of the Hot Wheel)
Place 2 cars to display all art spaced out perfectly to give a seamless perspective
Printed in Gloss Black PLA+ (Increased durability, UV resistance and temperature resistance).
Printed at 0.20mm Layer Line Width
CARS SEEN IN PHOTOS ARE NOT INCLUDED: USED AS ADVERTISMENT EXAMPLES (Only display with adhesives is provided)
.
~ 3M Command Strips used as adhesives (made for basic wall applications, however sticks firm to most surfaces)
- IF REMOVING FROM WALL - Slowly pull the adhesives strip away from the wall, stretching as it releases from wall (may have the possibility of pulling paint if bond is too strong)
- Pack of
20
(Displays 80 individual Hot Wheels models total - four fit on each unit).
- Command Strip Adhesive
pre-installed
, just peel and stick to your wall.
- Command Strips, give a firm hold with
no sagging
.
- Infinitely
stackable
, can be place sequentially in a line or stack multiple layers (spacing dependent upon wanted appearance).
- Fits majority of models, with larger models such as trucks and trailers requiring a larger platform for support (Request if needed).
-
Can be modified by
snapping/cutting
in half (with 1 command strip on each piece), allowing for use elsewhere in smaller quantities if needed
- 3D printing is a relatively new mainstream technology, quality may
differ
, however will always be
functional
and
appear as promised
.
- Ready to ship, packaged and made before order
I originally designed this product for myself, as I found a problem I wanted to solve, however I now believe others may have a similar dilemma and might have an interest in my solution. Thank you for your support, you will not be disappointed with your results.
Contact me with any recommendations, questions or requests. Thank you for your support!